remove the printhead on lexmark printer

To remove the printhead from the Lexmark printer, please follow the steps below. In this article, we’re going to make you go through these steps one by one.

Removal of printhead

Step 1 – Ensure that the printer is ON-You can make sure the printer is on. If this is not the case, you can click the power button.

Step 2 – Select options – To replace the printhead, you can click the options in the following order: – Configuration button-Maintenance-Replace printhead.

Touch screen panels that you need to choose-Ink Menu-More Options-Replace Printhead.

Step 3 – Open cover-This step calls for the print cover to be opened. It should be remembered that if the carrier does not immediately shift to the centre, the printer must be turned off. The power cord removal instructions are to be followed for this reason.

Step 4 – Press the tab-In this step, you need to press the tab and lift the latch.

Step 5 – Pull up-Pull up to remove the printhead.

Step 6 – Close the cover-You can close the cover in this step.

Removal of Power cord from improper printer

If you have a defective printer, the following steps may be taken to detach the power cord.

Step 1 – Remove the power cord from the electrical socket.

Step 2 – Unplug power cord from printer power supply.

Step 3 – Detach the printer power supply.

Method to install new printhead in the printer

This method involves the below steps-

Step 1– Open the cover.

Step 2– Pull up the tab on carrier latch.

Step 3– Remove printhead from the shipping container.

Step 4– Place the new printhead within the carrier.

Step 5– Close latch till it gives a click sound

Step 6– Close print cover

The installation of the printerhead is completed by following the steps above. These steps need to be carefully followed in order to prevent issues in the installation activity.

LEAVE A REPLY

Please enter your comment!
Please enter your name here