How to Fix Epson Printer Error Codes

Epson is a well-known global brand that manufactures multiple printers from Inkjet to LaserJet and recently popular wireless printers of various shapes, sizes, configurations, etc. So far, Epson has achieved the goodwill to link to all devices that support different OSs and configurations for an excellent printing experience. But occasionally, users come up with printing paradise interruptions. Error codes are primarily responsible for causing issues when using printers. Any printer, whether it be Injet or wireless, can be a problem. If you experience a similar problem, can you quickly opt for Epson’s technical support, or can you look forward to learning how to fix Epson’s printer error codes?

Here we will share some useful steps, like any other Epson printer customer, that can be followed to fix any coding error —

First of all, you should know about the major coded errors seen blinking on the printer head of the Epson printers. Learn about the causes of such problems and the possible solutions.

Error code 0xf1

A corrupted registry is the main cause of this error. Whenever you see this message blinking on your printer header, know that the printer does not read the information.


Switch off the printer power and unplug it for at least 5 minutes. Connect the plug to the wall outlet again and turn the printer on. The problem is going to be fixed.

You should try to install good antivirus. Often the malware attack is responsible for the development of such an error. Check your computer and allow the antivirus to detect malware or adware caused by a 0xF1 error.

Error code 0x97

This error is mainly due to hardware problems.


You must try the Power Cycle method by turning off the printer > unplugging it > wait for some time > then plug-in again and turn on the printer.

If the error is still visible, disassemble the printer and start cleaning it. Dust often causes similar shortfalls.

Error Code 000031

The scanner causes this error, and a common error is found in most of Epson’s all-in-one printers.


First, remove the ink cartridges and reinstall them properly. Make sure you’ve put the cartridges correctly. You should check out any of the videos or follow the user manual if you haven’t done it before.

Sometimes, the wrong setup at the very beginning is primarily responsible for the occurrence of the issue. When faced with an error, reconfigure the Epson printer to default. The error would be resolved by doing so.

Error Code 0x69

The presence of foreign bodies inside printers is responsible for this error. Solutions will be followed to eradicate this hardware issue.


First, carefully open the printer’s lid and check if there is a tape or piece of paper that causes an obstruction.

Remove the cartridges and reinstall them again.

Finally, try the power-cycle process to fix the issue.

So, this is how you can fix your Epson printer errors.


Please enter your comment!
Please enter your name here