Epson Printer Error img489

DIY Steps For How to Fix Communication Error On Epson Printer

Is your Epson printer not printing and scanning? Do you receive a ‘Printer paused’ message? Are you getting blurry and faint prints while you’re printing? All of these issues occur when your printer is unable to communicate with your computer. Below are some of the reasons and measures for correcting the communication error on the Epson Printer:

  • Faulty power cable
  • Fault in the power socket
  • Loose cable connection
  • Wrong interface cable
  • Network problem, if you use a wireless printer
  • Printer Hardware problem
  • Outdated printer firmware
  • Compatibility issues

Uninstall and reinstall printer drivers

Click on Control Panel to start the menu. Go to Printer and Devices. Look out for your printer Epson. To remove the old drivers from your device, right-click, and select Uninstall. Now, open Epson ‘s website, look for printer drivers, and downloads drivers on your desktop under the download section. Tap on the file you want to import and install the drivers. Follow the instructions and restart the system once the installation process is complete.

Check Cable Connections

Switch off the computer and printer. Verify that your Epson multi-function cable is correctly connected to your PC and the power port. Turn the two devices on.

Check Network Connections

If the printer is on the network, check for the TCP / IP address of the printer. Instead, try printing a Setup page on the control panel of the printer to see if a duplicate IP message is shown. When there is a duplicate IP post, change the printer IP address. Run the Network Diagnostics Test to review your printer and PC’s network settings. Go to the control panel on the printer display, click Troubleshooting. Go to Network Problems and then Network Diagnostics to conduct the network test successfully. The test results will be displayed on the display of your printer. Contact your Internet Service Provider if you request to contact the network administrator.

Run Printer Troubleshooter

Go to the start menu and open the control panel. Search for a Troubleshooting or a search box troubleshooter. Open the troubleshooter, go-to sound and hardware, select your printer and fix it. If everything’s all right, follow the next steps.

Reset the Printer

After performing the above steps, try resetting the printer using the ‘Reset’ button. You first have to download and remove the file to run the “Reset” button to fix your printer ‘s communication error.

Whether there is still a communication error on the Epson Printer, it is time to contact Epson Technical Support for more assistance.


Please enter your comment!
Please enter your name here